Leave Your Message

China Suppliers Factory for Waste Tire Cracking Carbon Black Deep Processing Line - Effective Pyrolysis Technology

The pyrolysis treatment of waste tires is recognized as the most effective method for recycling rubber resources. Pyrolysis carbon black, a key byproduct of this process, constitutes approximately 30%-35% of total pyrolysis products. However, its properties and reinforcement capabilities fall short compared to commercial carbon black. If not utilized properly, pyrolysis carbon black can lead to resource wastage and contribute to secondary environmental pollution. Therefore, deep processing and high-value utilization of pyrolysis carbon black presents significant prospects and a vast market opportunity! As a leading China supplier and factory, we are committed to developing innovative solutions for the effective use of pyrolysis carbon black, driving sustainable practices in the rubber recycling industry.

    Overview

    The pyrolysis treatment of waste tires is the most thorough and effective way to recycle rubber resources. Pyrolysis carbon black, as one of the pyrolysis products, accounts for about 30%-35% of the total pyrolysis products. However, it is far behind commercial carbon black in composition and reinforcement effect. If it is not well utilized, it will not only waste resources but also cause secondary environmental pollution. Therefore, the deep processing and high-value utilization of pyrolysis carbon black has broad prospects and a huge market!

    Advantages after deep processing

    After deep processing, it can not only increase the profit of the waste tire pyrolysis industry, but also greatly reduce the cost of some downstream application markets! After the thermal pyrolysis carbon black is added to the rubber and mixed to reach the optimal state, the grinding fineness (i.e. particle size) of the pyrolysis carbon black is analyzed by electron microscopy to determine the dispersion size of the carbon black, and the dispersion of the filler is crucial to its reinforcement. Therefore, ultra-fine grinding has a significant effect on the high-value application of pyrolysis carbon black and improving its application performance.

    Technical Parameters

    Model CR600TH CR800TH CR1000TH CR1200TH CR1400TH
    Fineness D100 (<um) 45 45 45 45 45
    325 mesh oversize <0.01% <0.01% <0.01% <0.01% <0.01%
    Size after granulation(mm) 0.5-2.5 0.5-2.5 0.5-2.5 0.5-2.5 0.5-2.5
    Yield(ton/year) 3000-5000 5000-8000 9000-17000 13000-20000 18000-30000
    Main Power(kw) 30 55 90 132 200

    Equipment Performance Characteristics

    1. Full process

    More than 20 years of experience in the powder equipment industry, strong R&D capabilities, optimized process configuration, to create a full set of production lines with high cost-effective competitiveness.

    2. Intelligence

    PLC industrial programmable controller realizes intelligent control and fully automatic operation. Intelligent control human-machine interaction system, human-machine interface touch screen realizes local and remote dual control. Meet the expansion needs of DCS to realize central integrated control management.

    3. Environmental protection

    The system uses negative pressure, sealing, dust removal and other methods to control the risk of dust leakage. The system has no wastewater discharge. The noise source of the exhaust port is equipped with a silencer to reduce noise.

    4. Ultra-fine

    Ultra-fine grinding and grading integrated design, infinitely adjustable fineness, wide adjustment range, and precise fineness control.

    5. Advancedness

    The modification function reserved by the pulverizer can realize the simultaneous completion of pulverization and modification. The application of double-layer technology of mixed granulation has high balling rate, good particle shape and concentrated particle size.

    6. Energy saving

    Horizontal pulverization structure, large production capacity and low unit energy consumption. Optimized and simple full-process process design, small number of equipment, and reduced plant investment. Continuous production line layout and intelligent control reduce labor input. Tail gas waste heat is used first, and heat energy consumption is small.

    7. Stability

    The structure is reasonably configured, and normal production can meet the 24-hour non-stop mode.

    8. Flexibility

    The system is operated independently by 2 production lines, and some links are shared, integrated and interconnected with each other.

    Process Flow

    1v2y

    Site Pictures

    21au

    Frequently Asked Questions

    What is the main benefit of deep processing pyrolysis carbon black?
    Deep processing significantly increases the profitability of the waste tire pyrolysis industry. It also reduces costs for downstream application markets and improves the reinforcement properties of the carbon black in rubber mixtures.
    What models of grinding equipment are available and what is their output?
    We offer models ranging from CR600TH to CR1400TH. The annual yield ranges from 3,000-5,000 tons per year for the CR600TH, up to 18,000-30,000 tons per year for the CR1400TH.
    How does the system ensure environmental protection during operation?
    The system utilizes negative pressure, sealing, and advanced dust removal to prevent dust leakage. It produces zero wastewater discharge, and exhaust ports are fitted with silencers to effectively reduce noise.
    Can the pulverizer perform modification and grinding simultaneously?
    Yes, the pulverizer features a reserved modification function that allows it to complete both pulverization and modification at the same time, streamlining the processing workflow.
    How is the system optimized for energy saving and lower operational costs?
    It features a horizontal structure with low unit energy consumption, utilizes tail gas waste heat, and integrates intelligent PLC controls. This reduces plant investment, energy consumption, and overall labor input.
    Is the system designed for continuous 24-hour production?
    Yes, the structure is optimized for high stability, enabling the production line to meet the demands of continuous 24-hour non-stop operation.